Iodine tablet correct use and efficiency
I've used these many times before, always followed the instructions (3 tablets/Liter, shake, wait 30 minutes minimum) and never had (or noticed) any issues. I've always been under the impression, that second to boiling it was the most effective method of purification.
However, A few weeks ago I hiked a few days on the AT using iodine tablets as my primary method of purification. When I got home, I forgot about the water in my camel pack for a couple weeks. When I finally went to clean my camel pack looked like I was raising sea monkey's in there.
Has anyone had the same experience? Could it be the quality of the tablet? I'm well aware that even the best polymers aren't impermeable on an extended timeline, but this was only a few weeks, and whatever it was, there was a lot of it.
This post was sourced from https://outdoors.stackexchange.com/q/24353. It is licensed under CC BY-SA 4.0.
1 answer
Welcome back to good old chemistry class! Apologies if this gives you nightmares.
First, the tablets used for water purification are not elemental iodine, but a crystal form called Tetraglycine Hydroperiodide. So there are things besides simple iodine getting into your water. More importantly however, is that many of these things, including the iodine itself, are not soluable in water, or only partially so. (See the wikipedia article on iodine) Instead, the iodine mixes with the water giving it time to permeate the cellular membranes of the organisms also floating around, thus killing them.
Your water has sat warm and stagnant for a time, allowing the iodine and other impurities to form precipitates. The things you referred to as Sea Monkeys, I assume are little dark orange to black colored blobs. These are nothing but clumps of precipitated iodine.
This post was sourced from https://outdoors.stackexchange.com/a/24354. It is licensed under CC BY-SA 4.0.
0 comment threads
0 comment threads