How are the routes of hiking trails determined?
While hiking and backpacking, I often ponder how the trail came to be located where it is. Some trails, especially longer ones, seem like they could take several different routes to get to their destination.
Let's say a wooded, mountainous US national park decides to build a trail several miles long between an established trail and an interesting geological feature. How would they go about routing said trail? How would the approach have differed before technologies like GPS, aerial imagery, and detailed topographic maps came about?
This post was sourced from https://outdoors.stackexchange.com/q/16862. It is licensed under CC BY-SA 3.0.
3 answers
You are accessing this answer with a direct link, so it's being shown above all other answers regardless of its score. You can return to the normal view.
Were I live they were first goat trails. Goats pick the easy way. Next waterbuffalo walked them, These were soon hooked to sleds to pull more. & are still in use to walk.
This post was sourced from https://outdoors.stackexchange.com/a/16896. It is licensed under CC BY-SA 3.0.
0 comment threads
There are many reasons a trail takes the particular path it does. Probably the most common is historical, as you mention.
Probably the least common is deliberate design. Most trails have evolved from usage patterns before anyone went out to deliberately make a trail.
Trails that are deliberately designed as trails are the results of lots of tradeoffs. There are many criteria that go into deciding where exactly to route a trail. Some are:
- Access to points of interest.
- Limit the slope. People generally don't like steep trails. They are also more difficult to maintain.
If you are designing a handicapped-accessible trail, then you have to be careful about maximum grade (among many other things).
- Ease of cutting the trail.
- Ease of maintaining the trail.
- Trying not to create erosion. You really don't want a trail going straight up a slope, even if the magnitude of the slope is acceptable. Use will make a rut. Then water will run down the rut making a bigger rut. In the end you created a new streambed, not a trail. Then people walk along the sides, making a even bigger mess.
- To avoid particularly sensitive ecological areas.
- To keep things like nearby houses out of sight of the trail users.
- Because conservation restrictions, deed restrictions, requirements of the land donor, or various other legal restrictions don't give you much choice.
- You (or the organization you are designing the trail for) only owns a narrow corridor.
- To avoid certain terrain, like rock jumbles, soggy areas, etc.
Added in response to new question
US national park ... How would I go about routing a public-use trail
YOU DON'T!
Hacking your own trails in a National Park is a really bad idea, not to mention a federal offense that will have consequences.
If you really think there should be a new trail somewhere in a National Park, you very humbly propose it to park management. Most likely they won't be interested. If you do actually convince them, it will be a process. They will have standards that new trails must adhere to, various policies and procedures that must be followed, etc. They will certainly want to choose the route. You might be able to help or have influence over that process, probably depending on what they think of you. They will most likely want to do the construction with their own trail crews. Volunteers they feel comfortable with may be able to contribute, but don't take that for granted.
0 comment threads
This very much depends on what country you're in.
The majority of footpaths in the UK are public rights of way. These are simply the routes people have travelled since time immemorial, the route from a village to the market town or an ancient drovers' road. Some of these were paved and became modern roads, many were not and remain footpaths.
The newer routes are often either created by the National Trust or other body to allow easy access to a specific location, such as the national trails, or are disused railway lines that have been converted to footpaths or cycle trails.
This post was sourced from https://outdoors.stackexchange.com/a/16865. It is licensed under CC BY-SA 3.0.
0 comment threads
0 comment threads