Relation of ski edge sharpening to skiing ability and snow conditions

TL;DR

Don't do it. It is really easy to ruin a perfectly good pair of skis. A great way to handle ski maintenance is to wax your own skis, touch up the burrs with a fine grit diamond stone (400-grit or so), and let a professional ski shop handle your edges a couple times per season. This would be analogous to doing your own oil changes on a car, but letting a mechanic deal with fixing the brakes and replacing the spark plugs.

That being said, if you are mechanically competent and approach ski tuning methodically, maintaining your ski's edges isn't truly that hard. If you're capable of sharpening a quality knife, you are already halfway to being able to tune ski edges.

The one stop recommendation for edge bevels: 1 degree base edge, 91 (aka 1 aka 89) degree side edge. More aggressive angles are more aggressive, but can also be terrifying and potentially dangerous. Seemingly minute changes (less than half a degree) majorly impact how a ski behaves. Some ski manufacturers will give their recommended edge angles for specific skis (usually buried away in technical specs). Files are for rough shaping, diamond stones are for sharpening, smoothing, and removing burrs.

Even if you don't do your own tuning, knowing what you're after can help a ski tech give you a good tune.

Introductory Remarks

This link from The Race Place gives a nice overview from which I'm cribbing and double-checking myself. My personal experience comes from 20+ years of tuning my own skis as well as working in ski shops off and on over the last decade.

This post is almost entirely about why you might choose specific edge angles; it is not a how to. If you want to see how to actually tune edges, check out these ski tuning videos:

• Sun Valley Ski Tools Base Edge and SVST Side Edge Part 1, Part 2 are nice concise videos (~15min for all three)
• World Cup Ski Tech Leo Mussi taking a ski from start to finish. German with subtitles. Beautiful to watch this man work. Note that he's dealing with a factory fresh world cup ski that only needs side edge beveling.
• Alex Martin is a world cup ski technician, working with Head Skis and tuning for the likes of Ted Ligety. This is a 40 min long, comprehensive video.
• Toko Ski Tech: Side Edge Angling is a 40min long, comprehensive video.

The ski tuning world has lots of idiosyncrasies about the best way to do anything. For example, different ski techs will adamantly tell you to tune the base edge or the side edge first, or that all tuning strokes must go from tip to tail. Follow whoever's advice makes sense to you; the key is to do everything consistently and get the same tune on your skis every time.

The Base

Before even thinking of tuning edges, the base (ptex portion) must be flat from edge to edge. This is checked by holding a truing bar against the base of the ski and seeing if/where light shines through between the base and the truing bar while sighting along the base of the ski. For a quick check at home, any object known to be absolutely, perfectly flat can be substituted.

If the base is convex (edges lower than base, light shines underneath the truing bar at the edges), the ski will feel "washed out", hard to turn, or "wander-y". In effect, you will need to tip the ski over exceedingly far in order to turn. If the base is concave (edges higher than base, light shines under the center of the truing bar), the ski will feel twitchy and unpredictable. Whenever the ski is running flat, each edge will be fighting to turn the ski opposite directions, generally causing terror. You can also detect a concave base (edge high) by running the truing bar along the base of the ski and listening for the edges.

While very minor deviations from a flat base can be corrected at home (some dirtbags will use a small hand plane or sandpaper), it is best to get a "Stone Grind" from a reputable ski shop. This has the additional benefit of structuring the bases, which is important for optimal running characteristics. Additionally, a stone grind is your reset button (within reason) for edge angles if you have created a monster.

Tools

As with any tools, you get what you pay for. Generally well regarded brands for ski tuning equipment include Swix, Toko, Sun Valley Ski Tools, and BEAST. There are many others out there, many of which produce good stuff. If possible, try to buy from ski tuning / ski racing suppliers and avoid generic big box hardware store tools. Brands usually market their highest end tools as "World Cup Doo-Hickey Thingamajigger."

A file guide is used to ensure that you are shaping your edges to a consistent angle--keep in mind that we'll be discussing the differences between 1 and 2 degrees. Some World Cup ski techs have tuned thousands of pairs of skis and can do this freehand, but us mere mortals cannot.

Files (which can be shockingly expensive for truly top-notch ones) are used for removing large amounts of material, but leave a rough edge. Diamond stones are used to bring an edge the last few smidgens into spec and to smooth things out. Just like sandpaper, a 100-grit diamond stone will be coarser and remove more material, while a 1000-grit diamond stone will remove less material and leave a nicer edge. Diamond stones also have a side benefit: when you clip a rock with an edge, the remaining material can become work hardened, to the point that you could actually dull a file. A diamond stone can remove this outer layer, allowing your files to work properly on the underlying material.

You will generally only use your files a handful of times per season: when changing edge angles or repairing damage. Diamond stones are used for daily/weekly/monthly touch ups and sharpening. Think of it as caring for a fine kitchen knife: you wouldn't go set it up on a vice in the workshop and take a bastard file to it every time it was getting dull. That would only be the case if the edge chipped and you need to do major modifications. Instead, you would use a diamond stone / pocket stone / water stone / etc to restore the fine cutting edge.

For a bare bones home setup, I would recommend a cheaper file and a lower grit diamond stone (probably 200 or grit or so) as well as an adjustable file guide (one each, base edge and side edge). Additionally, you will need a ski vice (or similar) to hold the skis in place and something to hold the bakes back while you work (the rubber bands from the produce aisle work well). From there, suggestions for upgrades would be:

• A gummi stone: used to debur ski edges after tuning, similar in idea to a honing steel for a chef's knife. These come in various hardnesses, start with a medium hardness and build your collection outwards.

• A side edge file: basically a really short file that can follow the contours of the edges on modern shaped skis more easily.

• A base edge file: the biggest, baddest, widest file you've ever seen, which is useful to ensure that the base edge is filed flat (as opposed to having wavy undulations).

• Higher quality file guides: you will get more precision and durability out of high quality, solid metal file guides. Note that many high end file guides are fixed angle tools, necessitating multiple purchases if you want to tune different edge angles. Spring loaded clamps (from the hardware store) are useful to ensure that your files/stones are staying tight against your file guides.

• A full set of diamond stones, ranging from 100 grit to 1000+ grit. Alternatively, some people prefer a set of ceramic stones or a set of Arkansas Pocket Stones.

• A sidewall plane: as edges get filed back, the actual sides of the skis can interfere with tuning the edges and a sidewall plane is used to removing this obstructing material.

• Base / Side edge bevel meters: really starting to get esoteric here, but are used to verify that an edge has been tuned to the desired parameters.

The list goes on from there, but you probably don't need this post if you need more ideas.

There Are Two Edge Angles

Before we begin talking about specific edge angles, there are actually two edge angles we need to talk about: base edge angles / base edge bevel and side edge angle / side edge bevel.

Base Edge Angles

Base edge angles affect how far the point on your edges gets lifted off the snow when the ski is flat, and generally range from 0 to 3 degrees. A smaller angle will help the ski initiate turns quickly, but can make things happen a little too quickly. Terrifying. Conversely, a larger angle will take longer to initiate turns, but will be more predictable.

For harder snow, a smaller base edge angle is beneficial. For softer snow / powder, a larger base edge angle is better. From a tuning perspective, decreasing the base edge angle generally necessitates a stone grind to reset to zero followed by hand filing with a guide to reach the desired angle.

Some recommendations:

• <1 degree: expert ski racers. Slalom skiers might be around 0--0.5 degrees, while a super-g or downhill racer might be closer to 1 degree.

• 1 degree: as close as it comes to the golden angle. Generally a good starting place on an unfamiliar ski. Many very good skiers have never been on anything else.

• 2 degree: very forgiving, almost unresponsive ski. Can be good for a dedicated powder ski that will never see hardpack, or for freestyle moguls or park & pipe.

In general, if a ski feels overly twitchy and aggressive, increase the base edge angle. If a ski feels unreactive and unwilling to initiate turns, decrease the base edge angle. Adjustments will have more effect on harder snow.

Side Edge Angles

Oh, the humanity! There isn't a standardized way of measuring angles. Company A's 1 degree is Company B's 91 degree is Company C's 89 degree. European companies usually measure 86-90 degrees, while US companies usually measure 90-94 degrees. I will use the 90--94 convention. Adding on to that confusion, you must also take into consideration that both the base edge angle and side edge angle affect what angle is formed at the point. For example, a tune with a 1 degree base edge and a 92 degree side edge will have those edges meeting at an 89 degree point. As such, changing the base edge angle often, but not always, necessitates changing the side edge angle as well.

Increasing the side edge angle (say 93 degrees) will make the ski bite harder and turn more aggressively. A more conservative side edge angle (say 90--91 degrees) will help the ski release from turns and be more forgiving.

In general, a few starting points might be:

• 90 degrees: beginner skis
• 91 degrees: 90% of skis & skiers.
• 92 degrees: Expert skiers, on-piste carving skis
• 93 degrees: Ski racing, expert skier on carving skis
• 94 degrees: World Cup level ski racing in slalom. Even then, 94 degrees is rare.

If the ski feels like it is washing out of turns and not holding an edge, increase the edge angle. If the ski has a mind of its own once on edge and doesn't like to release from turns, decrease the edge angle. Too high of an edge angle is a great way to destroy your knee. Additionally, note that a larger side edge angle, in conjunction with a smaller base edge angle, creates a sharper point which can be more fragile upon impact with rocks.

For harder snow, a sharper side edge angle helps the ski bite and carve. For softer snow, a sharper edge angle doesn't have as much benefit and can even be detrimental.

Example Scenarios, Other Considerations

While 99% of skis should be tuned with a consistent edge angle from tip to tail, you can actually vary the base and side edge angles along the length of the ski. This starts to get into the dark arts of ski tuning, but can be beneficial for certain conditions and as a way of compensating for an individual skier's technique.

Here's a few scenarios with recommendations:

• Alice has never skied before and has just bought her first pair of skis. Recommend 1 degree base and 90 or 91 degree side edge.
• Bob is an intermediate skier who likes to go all over the mountain and is a weekend warrior, with a pair of all-mountain skis. Recommend 1 degree base and 91 degree side edge.
• Carol is an advanced skier who rarely ventures off trail, instead preferring to take her carving skis on groomed runs. Recommend 1 degree base and 92 or 93 degree side edge.
• Dave is an expert skier who goes everywhere and cranks out beautiful turns on any terrain and any snow. Recommend 1 degree base and 92 degree side edge.
• Eve is an Olympic-calibre ski racer, specializing in the slalom. Recommend 0.5 degree base edge and 93 or 94 degree side edge. Better yet, work for multiple seasons with Eve to dial in her tuning specs & preferences, validating changes with timed training runs.
• Frank is a 14 year old, budding ski racer. He lives for speed and is gravitating towards the super-g (Mom & Dad refuse to let him race downhill yet). Recommend 1 degree base edge and 93 degree side edge.
• Grace is a freestyle mogul skier who also spends time in the pipe & park. Recommend 1-2 degree base edge and 92 degree side edge. Consider having less aggressive edge angles in the tip and tail to make off-kilter landings and unexpected bumps more manageable.
• Harold is a ski mountaineer. He lives for making technical jump turns down icy, 60-degree couloirs. Consider the following: 1-2 degree base edge and 91 degree side edge tip and tail, transitioning to 0 degree base and 93 degree side angle underfoot. This will minimize the risk of hooking a tip or tail on a jump turn, while giving as much grip as possible in the middle of turns. This will ski terribly under other circumstances.
• Ingrid only ever skis powder out of a helicopter or snowcat on her 125mm waisted skis. Recommend 1 degree base edge and 1 degree side edge angles, aka the edge angles will basically never matter. However, if she does (gasp) encounter non-blower powder, her ski will be predictable. Never expect to have to tune Ingrid's edges again, outside of removing burrs.
• James loves his skis (the Awesome Ski Company's xTrEmE GraPhiX 185), but they are getting beat up and just aren't performing the way they used to. Recommend seeing if Awesome Ski Company lists their factoring tuning specifications for that specific model, perhaps even give the company a call to see what they recommend for that model.
• Katrina is generally happy with how her skis perform, but feels like they're a touch "hooky," i.e., they start turns too aggressively. Try increasing the base edge angle in the tip or perhaps slightly detuning the tips.
• Liam is an expert skier who had a compound femur fracture & tore his ACL on the first run of the season. After numerous surgeries and extensive physical therapy, Liam has been cleared to start skiing again. Recommend 1 degree base edge and 90 or 91 degree side edge to start, perhaps moving to more aggressive angles as he heals and regains strength.
• Mary lives for terrain parks and hits rails whenever possible. Recommend...hopeless. Rails will round-over and generally mess up edges quickly. Start with something forgiving (say 2 degree base, 91-92 degree side edge) and try to smooth out the most offending burrs. Strongly recommend having one pair of skis for pipe and park and a pair of skis for everything else.
• Nathan generally likes the way his skis are performing for him, but wishes they had just a bit more grip on hardpack. Try slightly increasing the edge angle--even half a degree could be enough and we don't want to mess with the other performance characteristics.