How do you make a stone axe?

As an alternative to making an actual axe head you could create a simple chisel, which you then hit with a piece of wood that serves as a hammer.

This can be used fairly efficiently to slowly cut through even larger trees and has the several benefits versus a proper axe:

• A chisel is far quicker to make and thus more easily replaced.
• You save yourself the headache of creating the binding between axehead and handle, which is quite tricky and will probably fail the first couple of times unless you know exactly what you're doing.
• As with any stone tool you should not be putting it through the works like you would a modern day steel axe - while using a chisel you're less likely to strike with too much force thus breaking your axehead or handle.

Example:
On the channel, Primitive Technology, a guy shows how to use a chisel while creating a proper axe.

posted over 7 years ago

CC BY-SA 3.0

fgysin reinstate Monica‭

564 reputation 18 106 59 0

In the book "Poland" Michner describes a technique for embedding a knapped stone axe into a growing tree, a maple if I recall. This is a slow technique, the tree has to grow enough to retain the stone. No binding, lashing, glueing, etc needed, just a lot of time. The end result is a long handled stone axe.

posted over 7 years ago

CC BY-SA 3.0

user12753‭

11 reputation 0 2 1 0

There are two principal techniques for making stone tools, depending on the properties of the material you have available.

The first and probably best known is knapping. This is used with glassy rocks like flint and obsidian which can form sharp fracture surfaces when struck or pressed. This process takes a fair degree of skill as you need to understand how the stone will fracture and is a very different technique to conventional stone carving.

Flint tools can perform surprisingly well, in particular they can take an extremely sharp edge, in some cases sharper than can be achieved with steel. The downside is that the material is quite brittle and the edge dulls fairly quickly when used for chopping.

The second method is to shape stone by abrasion as in this example using a second stone as a grinding surface, possibly aided with a sand and water mixture. As an aside it is also interesting to note that a lot of early cast metal axes (ie copper and bronze) look very similar to this type of stone axe.

Having said that in a survival situation making a stone axe is likely to be a very low priority. Building shelter etc only requires thin poles which can usually be cut with even quite a small knife with relatively little effort and standing wood does not usually make good fuel, you are much better off collecting dead wood which should by dry enough to snap easily.

Equally the techniques required are somewhat specialist and labour intensive and so unless you have prior experience there is a good chance that making them will require more effort than is saved.

In terms of binding a common material is rawhide or processed sinew which is applied wet and shrinks as it dries, tightening the bindings. For obvious reasons fixing a stone head to a haft is a bit more tricky than a steel one and it is far from easy to achieve a connection strong enough to withstand the rigours of chopping and you also have to consider the potential danger if the head does come off during use. With all this in mind, in a survival situation just using the head as a hand axe is potentially more practical.

posted almost 8 years ago

CC BY-SA 3.0

Chris Johns‭

291 reputation 0 87 29 0