How quickly do Oxygen Absorbers "spoil"?

Depends somewhat on what type of absorber you're using, but they're most commonly made from iron powder, which are good for hours between first opening and sealing in your bags, but that time can be extended to days, weeks or longer if you keep the unused ones in an airtight container like a jar, or some other container with a rubber seal.

Oxygen absorbers remove oxygen from their surrounding atmosphere by chemical reaction. Simply explained, most are filled with an iron and salt compound that rusts when it's exposed to oxygen and humidity, and the oxidization eats up all the O₂.

They are pretty much miniature hand warmer heat packs, and will actually become warm to the touch when they are working. This isn't a fast process, it takes about 4 hours for the packets to reach their maximum absorption rate, and they will absorb oxygen until all the iron in them has oxidized. Once all the oxygen is gone, the reaction stops, but it can reactivate once introduced into the air again.

An absorber is considered spoiled or "loaded" when all the iron in them has oxidized. Complete oxidation of 1 g of iron can remove 300cm³ of oxygen in standard conditions, which amounts to a volume of air of almost 1,500cm³ or 1.5L (~50oz) since oxygen only makes up about 20% of the composition of air. If you have a larger container you want to absorb all of the oxygen out of, you could save some money by using a hand warmer in place of several smaller packets in a larger bucket, but the hand warmers aren't exactly food grade, even though I'm sure they won't hurt anything.

New oxygen absorbers are good and usable for about a year as long as they are sealed, so it's recommended to only stock up on what you plan on using in a year.

^{Source:
www.usaemergencysupply.com
www.nitro-pak.com}

posted over 8 years ago

CC BY-SA 3.0

ShemSeger‭

1774 reputation 82 481 195 0

This may not be an exact answer but I figured I would share it just in case you hadn't seen it.

They say 10 to 15 minutes is the window you have to get them in the Mylar and seal it.

From Backdoorsurvival.com :

The most important precaution is to limit the exposure of unused packets to air. Take out only what you are going to use in the next 15 minutes or so and seal the rest up in a jar with a screw top lid. Don’t put them in a zip lock bag because they will immediately suck up the residual oxygen and become useless.

A good rule of thumb is to use one 300cc oxygen absorber for each gallon of product. For larger containers, you can purchase larger, 2000cc oxygen absorbers which are ideal for 5 or 6 gallon buckets.

Be mindful of the little pink pill. Most reputable vendors will include a little pink pill with their package of absorbers. If the pill is blue, the absorbers are toast so don’t use them. However, if they are just starting to turn – not quite pink and not quite blue – they are probably okay since the change of color can happen in as little as 10 or 15 minutes.

Another good test of their viability is to pick one up an hold it. It may feel warm. It will also feel soft and powdery, like a little pillow. If it gets real hot and uncomfortable, it is in full out working mode and has probably been exposed to the air for too long to be usable. In this case it may also start to feel hard and brick like. Toss it.

Oxygen absorbers themselves have a limited shelf life, even when sealed. Only purchase an amount that you will use within a year."

Full article can be read here

Every other thing I've seen, read, or been informed of says 1-4 hours but I don't believe that, I wouldn't want to use one that had been out for over an hour.

posted over 8 years ago

CC BY-SA 3.0

Nate W‭

56 reputation 2 19 7 0