What is the different between climb-spec and military-spec webbing?
I'm shopping for some 1" tubular webbing. There is climb-spec webbing and military-spec webbing. The military-spec description says
Meets industry-standard military specs for breaking strength and resistance to abrasion
What exactly is the difference, if any, between these two? When should each be used, and what are the specification differences?
This post was sourced from https://outdoors.stackexchange.com/q/10606. It is licensed under CC BY-SA 3.0.
2 answers
For the most part they are identical, the only identifiable difference is that military spec tube webbing has a ribbed weave, while climbing spec has a smooth weave. Having a smooth weave obviously makes tube webbing better for tying and most importantly, untying knots; it also makes it a lot easier to pull through your carabiners, especially when stacked. Climbing spec is also slightly stronger – ~19kN vs 17.6kN.
Other than that, there's no real difference, the primary reason why you would use one over the other would be availability. Military spec webbing is more common in stores in some regions, and comes in a larger variety of colours (like digital camo).
Military Spec: (Ribbed)
Climbing Spec: (Smooth)
This post was sourced from https://outdoors.stackexchange.com/a/10607. It is licensed under CC BY-SA 3.0.
0 comment threads
In addition to @ShemSeger's answer, there exists another minor difference that is also visible in his images: On the red webbing, there are three white threads. Each of these threads stands for 5kN of strength. All climbing webbing that I know has this kind of marking, though often in a different color.
At first glance, this might seen to conflict with the requirement that UIAA-certified sewn slings have a strength of at least 22kN, but that is for the loop, i.e. both strands and the sewn connection are tested.
This post was sourced from https://outdoors.stackexchange.com/a/10614. It is licensed under CC BY-SA 3.0.
0 comment threads