What are offwidth cracks and what makes them so hard to climb?
There is a notorious kind of crack called offwidths. Several friends of mine stated, that they were pretty devastated at first when they were not able to do 5.8 offwidths in the valley. Later they learnd, that this was quite common. There has even been an epic film called "Wide Boyz" about two british climbers taking on the hardest american offwidths. My questions are:
What exactly is an offwidth crack?
What makes offwidth hard to climb? Or less subjective: What technique is required ascend an offwidth?
1 answer
Off width cracks are cracks that are too big to finger jam or fist jam, but too small for you to fit inside and chimney climb, so you have to come up with really awkward and very physically excerting moves to get up them, like climbing upside down (literally).
Basically they are cracks that are just the right width to not be fun, and take a lot of physical exertion to climb. Off width climbing is a lot of grunting, struggling, and trying to wedge your various body parts any where you can. You come out at the top dirty, sweating, scraped up all over and absolutely exhausted.
A common technique to get through off widths is to essentially use your arms and legs the way you would use your fingers in finger cracks, shove as much as you can inside the crack and then bend them to get them jammed. Other than that, the answer to how you climb offwidths is, "However you can."
This post was sourced from https://outdoors.stackexchange.com/a/9151. It is licensed under CC BY-SA 3.0.
0 comment threads
0 comment threads