Learning to fall when leading: what is good fall technique?

You will learn to fall through practice however there are some important points to consider:

1. While climbing DO NOT let the rope wrap/run around/behind your leg(s), when you fall you will flip upside down! Therefore always know where the rope is!

2. DO NOT Kick/Push off the wall, you will only pendulum back into it harder!!!

3. Always know where on the route you are; have you climbed above a roof and not placed any gear yet? Are you going to take an awkward swing? Are you going to hit the deck?

Is there good technique for a fall? Yes, feet out with knees slightly bent ready for impact hands up and slightly out elbows slightly bent. You'll want to be prepared to protect your face/head if need be. Do not hold gear or make some last desperate attempt to jam a finger into a pocket, it will get stuck and your climbing season will be over. If you know you're going to fall, take it and keep it clean.

If you have access to a sport climb and/or a gym Lead climb some routes that are of a hard difficulty for you in order to guarantee a fall. When I was learning to Lead my belayer was an experienced German climber, every time I said "TAKE, I'm going to fall" he would pay out slack and yell "Climb On!". I would then freak out and down climb to the last draw and yell "TAKE!" again. It was all in my head, if I could down climb six holds I could have taken 3 seconds to clip the draw. It's all in your head, get over it! Take a big fall learn what it's like and you will be prepared! Practice on an inclined route as big falls will generally end with you landing in mid air, you don't need to worry about the hands and feet as much but you'll get a good feeling of big falls.

In terms of preventing a fall, my personal recommendation is BREATHE! Practice your breathing technique, you will get less pumped and remain calmer.

posted over 10 years ago

CC BY-SA 3.0

AM_Hawk‭

121 reputation 13 28 15 0

Just two small addenda to the great answers from AM_Hawk and JPDurham:

Look down.

This advice seems obvious, but if you don't specifically train yourself to do this, you might not do it when you take an unexpected fall.

Know where on the route you should absolutely not fall.

Both answers kind of mention this, but I thought it was important to state it separately. These are four situations that I thought of on the spot, but there are definitely more (some of these expand on AM_Hawk's third point):

• When casting off to lead a pitch and you would sustain a factor two fall because you have not place a Jesus Nut.
• When falling would result in decking from a significant height either onto a ledge or the ground. This one seems obvious, but keep in mind that sometimes normal slack in the belay system and clipping high can result in falls that are unexpectedly long.
• When a fall would result in a pendulum impacting with a wall close to the lowest point of the pendulum motion. At this point you are moving sideways with the same velocity as if you had fallen straight down. What makes this situation dangerous is that you are likely to impact with the side of your body, which is not at all equipped to absorb an impact. Expect a broken pelvis or worse!
• On loose rock where a fall could result in rock fall triggered by you or your rope.

posted over 10 years ago

CC BY-SA 3.0

DudeOnRock‭

176 reputation 21 42 26 0

Great answers here, to add a single (non comprehensive) point I've learned through a dozen or so good falls I've taken or caught: as long as your not at risk of decking (either ground or ledge), and your belay is comfortable, give your belayer some room to move.

We've often tied the belayer in with a few feet of slack so the belayer is pulled up (and can even give a little jump late in the catch, especially on a clean 90 degree wall). Doing this will avoid that abrupt jerk when the rope comes taught. It's that abrupt jerk that pendulums you into the rock at an uncomfortable pace (and can break ankles).

You fall a few extra feet (which comes with risks if you're not on a clean 90 degree wall, so consider your particular situation), but it really softens the catch. However the belayer definitely has to be aware that they'll be pulled off their feet, and need to be in a comfortable position to accommodate this.

We often like to tie into the anchor using a bite in the rope on our multi-pitch routes. Easy tie-in, and you can easily set the slack the belayer has.

posted over 10 years ago

CC BY-SA 3.0

David Parks‭

16 reputation 1 2 2 0

I would try to separate the concerns of placing good gear and learning the action of falling safely.

Here is an article from UKC covering the falling aspect! In the video they use a sport route at a climbing wall so falls can be taken without worrying about the quality of the protection.

The other step would be to improve ability to place good protection, practising in an environment where you will not fall or a fall has no serious consequence. Ie, while walking along the base of the crag, while traversing at a low hight, while on a mock lead protected with a top rope or on a climb well within your comfort zone. Have a more experienced friend, or a paid instructor, inspect your work. Weight your protection and give it a some jolts with your body weight.

The third and often overlooked ingredient is your partner, build a relationship with someone you trust or feel you will come to trust as your skills develop. Develop good belaying practices with them so you will know what is happening while you are climbing and will be reassured by their presence.

Hopefully a combination of these things will allow you to know how to fall and if it is safe to do so.

Good Luck!

posted almost 10 years ago

CC BY-SA 3.0

aaaaargZombies‭

51 reputation 2 23 5 0

Is 'learning to fall' something that climbers do through practice or through on-the-job training, as it were?

A little of both. You can go to your local gym or outside on routes that you feel comfortable climbing and once you get a few feet above a solid bolt or bomber piece of gear, let go. Read this article on practicing falling, and this one. Since you know you're going to fall, the fall won't feel the same as a surprise lead fall, but you can learn how to relax and react. You can continue doing this on various types of climbs (slab, crack, overhang, etc.) to get the hang of falling. After some practice, try pushing your limits (safely) on a project to get over the psychological aspect of falling. If falling is all you are thinking about when you're climbing, you won't enjoy the climb and you are much more likely to actually take a fall.

This isn't something I've seen addressed much. Is there a 'good fall' technique for lead climbing? Are there things during the fall I should be doing?

The biggest things are relaxing, knowing where your rope should be in relation to your feet based on the last piece of gear, not fighting it once it's happened, don't grab the rope, don't grab gear, and being aware of your surroundings (i.e., potential obstacles you can hit if you should take a fall). Depending on what kind of climbing you're doing (slab, crack, overhanging, etc.), there are specific things you should be aware of.

Slab

First, a fall on low-angled slab is usually unpleasant even if you do everything right. However, in the event you do:

1. If it is steep enough, pat your way down with both your hands and feet. It's all about keeping everything off the wall as much as possible and not catching on anything on the way down.

2. If it's lower angled, skip down with your feet (do not jump, just light touches). Try to keep your balance and keep your feet moving and keep your knees bent so they ease the impact along the way and when you finally come to a stop.

Regardless of the type of slab, avoid any prolonged contact with the rock, try to avoid getting caught on anything, and if you ever get flipped as you're falling, tuck and roll.

Crack

Avoid any jams that might not come out if you fall so you don't break something or get flipped. If it's a wide crack (off-width), you may need to apply the same types of techniques for falling as you would climbing slab.

Overhang

Avoid any jams or positions that will keep you from taking a clean fall. Watch your footwork and hands so you don't get in a position that will cause you to flip or get caught in the rope. If you're falling into a wall, relax the knees and elbows to soften the impact.

How does one deliberately set about learning how to cope with big falls - higher fall factor than top-roping generally allows?

Practice and experience. Find some safe projects to push your limits on. Climb routes you are comfortable on, but place one less piece of gear. The biggest thing is learning to trust yourself and your gear. As you lead more, you'll start to develop the right mindset for it.

posted over 10 years ago

CC BY-SA 3.0

JPDurham‭

1 reputation 0 2 0 0