Do "R" values add proportionally?
For winter camping it is recommended to use a sleeping pad with an R value greater than 5.
Can you alternatively use two closed cell 2.5R pads one on top of each other?
If using an inflatable pad with an R value of 5 and a closed cell with an R value of 2.5 will you effectively have a 7.5R value set up?
This post was sourced from https://outdoors.stackexchange.com/q/5568. It is licensed under CC BY-SA 3.0.
2 answers
You are accessing this answer with a direct link, so it's being shown above all other answers regardless of its score. You can return to the normal view.
The following users marked this post as Works for me:
| User | Comment | Date |
|---|---|---|
| Iizuki | (no comment) | Jan 21, 2024 at 13:04 |
Yes, the R-value will add of your different layers. If you wear layer A with R=5 and layer B with R=2.5, the overall insulation value will be R=7.5.
To explain this a bit, we think of two layers or flat walls which interact only due to thermal conduction. This is just a model and in reality other effects will come in play. The Fourier Law for thermal conduction (relative to the surface) of one layer states:
heatFluxDensity = thermalConductivity / thickness * temperatureDifference
[W/m²] = [W/(mK)] / [m] * [K]
The R-value is stated as a material property as
R = thickness / thermalConductivity
with the unit [m²K/W] which leads from Fourier law to
R = temperatureDifference / heatFluxDensity
Adding several layers, we can use the electrical analogy and are able to add the resistances of each layer to an overall resistance.
Knowing your material properties (which might be difficult in the clothing industry), assuming a temperature gradient or a heat flux, you can then evaluate the other using this equation:
heatFluxDensity = (innerTemp - outerTemp) / (R1 + R2 + ... + Rn)
More interesting links to read:
This post was sourced from https://outdoors.stackexchange.com/a/5571. It is licensed under CC BY-SA 3.0.
0 comment threads
In calculating the R-value of a multi-layered installation, the R-values of the individual layers are added.
I would imagine a slight diminishing return as the r-value is a laboratory measurement in ideal condition which is not quite the same as on the field (variable temperatures, moisture, air movement, etc.).
This post was sourced from https://outdoors.stackexchange.com/a/5573. It is licensed under CC BY-SA 3.0.
0 comment threads
0 comment threads