Urbex question: How to protect myself from asbestos?
During some Urbex explorations sometimes I'll encounter a building with an asbestos warning. Is there any way that I can safely explore these buildings? Would Just something like a surgical mask and some gloves be enough or can I not go into these places without a hazmat suit?
Thank you very much.
This post was sourced from https://outdoors.stackexchange.com/q/5561. It is licensed under CC BY-SA 3.0.
3 answers
There is no way to prevent asbestos fibers from entering your lungs except by certain facial masks with specialized air filters. An ordinary surgical mask will NOT work. The fibers are too small.
This post was sourced from https://outdoors.stackexchange.com/a/7595. It is licensed under CC BY-SA 3.0.
0 comment threads
It might be worth noting that asbestos can contaminate things, ie your clothing. So even if you wear a mask while on site you could still expose yourself, or others after you have left.
here's a link to a pdf about PPE for working with asbestos
here's the HSE's (uk goverment body for health and safety) site for asbestos
be careful.
This post was sourced from https://outdoors.stackexchange.com/a/7607. It is licensed under CC BY-SA 3.0.
0 comment threads
Welcome to outdoors.SE! Older buildings often contain asbestos in solid form, and it may be sealed up (under floorboards, in tape around heating ducts, etc.). As long as it's not ground up into dust, the hazard is minimal. For example, construction workers knocking down a building or remodeling it can get exposed to asbestos dust if they don't realize that there's asbestos in it. Simply walking around in a building that contains undamaged asbestos isn't dangerous. The danger would be greatest for people who have long-term exposure, e.g., the people who used to work in the asbestos industry. You could try to judge whether the building is damaged, but it might be difficult to figure that out.
This post was sourced from https://outdoors.stackexchange.com/a/5562. It is licensed under CC BY-SA 3.0.
0 comment threads