How to harden feet to avoid blisters on long hikes

I do a few things and they are helping very much:

1. Walk around in Barefoot Running Shoes. You don't have to get the freaky ones with the separated toes. I have ones that look like normal sneakers.

2. Learn the fox walk

3. Wear double socks. One thin pair and one normal pair. The friction will get distributed.

4. Try to walk slower and enjoy the hike by paying more attention.

5. Shave off the calluses on your feet.

posted almost 13 years ago

CC BY-SA 3.0

System‭

2019 reputation 180 537 246 0

Having various long hiking experience I find the following seems to help reduce blistering:

1. Toe socks .. big help.
2. Stopping and changing socks OFTEN or as soon as tehre is any burn feeling. This is the biggest thing. As soon as you sense friction STOP and deal with it. Let feet cool and dry and change socks at least.
3. Use Band Aid blister pads. They help a lot.
4. Treat any blister right away. A needle used to drain it will stop the sting and pain. Apply band aid after.
5. I have had good results with Second Skin liquid on anything that is sore.
6. Taping works! I have used sometimes a couple of rolls of white tape to protect sensitive spots.

Most important. Be careful not to overdo things. I had an Achillies problem from that. Plus be careful of Merigial Paresthitica. I just had my first experience and it is not fun so adjust your pack belt carefully. HAVE FUN by not having blisters or injuries by easing the pace and taking care of problems early. Dara

posted over 9 years ago

CC BY-SA 3.0

dara‭

11 reputation 0 1 1 0

Stop PAMPERING Your Feet if you Want Them TOUGHER!

Not sure what you mean by "liner socks", but one of the worst footwear mistakes a hiker can make is wearing TWO pairs of socks. I would sincerely advise against two pairs of socks, if that is what was advised above. Most seasoned distance hikers and runners would tell you that, or ask yourself after doing a nice ten miler with two layer socks.

I don't know why your feet are not hardening' so to speak. I work in construction, when the economy favors that sort of work.. :). My experience, and you can also ask around on this, is that a tradesman who uses his hands will have rougher hands, developed calluses, etc. I tend to experience soft hands at the beginning of the season, but they get a lot tougher quickly.

I worked with concrete a bit and that has lye, and that would dry me until my hands bleed if I failed to wear gloves. I think that is a dramatic example, but generally, from what I know after decades of running and doing seasonal construction: oily skin is softer than dry skin.

You might benefit from understanding alkaline vs acidity of the skin. You may try to control oiliness of your feet, maybe stop lubricating and moisturizing them.

I see a lot of people here recommending using moisturizers. That is new to me..wow. I would NEVER use a moisturizer, two pairs of socks or any type of rub. I don't have any feet issues after thousands of miles of road and alpine trail running in heat and rain, but my experience is FRICTION KILLS. You want to stop your skin from slipping, sliding, and rubbing back and forth inside your shoe. Those blisters are the result of this friction.

Lubing your feet up and wearing two pairs of socks is just idiotic if you want to eliminate that sort of friction and in effect stop the blisters. If you keep your feet dry, and un-oily, I am willing to bet those feet will toughen up.

Construction workers don't rub lotion on their hands, typically. In fact everyone I know doesn't even own lotion. If they crack and bleed we might use bag balm or something as a spot treatment, but the trick to tougher hands is repeated abuse, not pampering.

Food for thought, take it or leave it.

Hope your running continues and grows.

posted over 10 years ago

CC BY-SA 3.0

Pliny Harell‭

21 reputation 0 5 2 0

I have routinely done week hikes with sufficient creek crossings that we didn't even try to keep dry feet. (Coral Creek has 22 crossings in 3 miles. Most of the trails in the area have at least a knee deep crossing every hour.)

These trips would be the first intro to the school I worked at. A 7 day trip would cover from 80 to 120 km and 15 to 30 thousand feet of elevation change. Trails ranged from horse trail, seismic cutlines, to bushwhack.

Standard operations:

Everyone wears a thin pair of poly propylene socks under a pair of wool socks.

The first day we stop after 1.5 hours walk, and everyone removes shoes and socks for a foot inspection. Hot spots are taped. Kids are taught what to look for. Adjustments are made in how they tie shoes.

Repeat again at lunch and mid afternoon.

Second day we only do it at noon.

Third day we remind people to check their feet at noon.

At the top of a pass we remind people to pull their feet back in their shoes, and tighten up the forefoot lacing. At the bottom we remind them to loosen up again.

Everyone brings two pairs of footwear.

In general we don't recommend boots, but rather high top runners unless the student has a rep for rolling ankles.

In evening after set up chores are done, everyone changes into dry socks and their second pair of shoes.

Some students and staff have tried sandals. Lot of problem with grit. I have tried high top water booties. This works well if you have tough arches. Crocs or sandles are ok for camp shoes.

When we know that feet are going to be wet all day, a slather of vaseline before socks in the morning slows down the foot wrinkling and cracking.

With this protocol we usually got through a week long trip with 20 people with under a half dozen actual blisters.

posted over 8 years ago

CC BY-SA 3.0

Sherwood Botsford‭

1032 reputation 9 247 106 0

Urine....yep urine....if I hadn't worked for awhile doing any kind of hard manual work I would piss on my hands and rub it in till dry.........never ever got blister........at the moment my feet are a bit tender due to all the skin peeling off because of antibiotic side effect whilst in ICU with another matter.....I'm finding it hard to walk so am thinking seriously of urinating in a dish and putting my feet it in..........urine was also and old bush remedy for ear aches......mother used to get me to urinate in a tin the she would pour some in my ear----and it worked

posted over 9 years ago

CC BY-SA 3.0

Bruce Lennon‭

11 reputation 0 1 1 0

I do a few things that have helped:

1. Wear liner socks inside the wool socks.
2. Wear Gore-Tex boots.
3. I dry my feet and socks when I set up camp.
4. If I end up getting a blister, I duct tape it.

posted almost 13 years ago

CC BY-SA 3.0

Vince‭

11 reputation 0 1 1 0

Rubbing alcohol, also known as surgical spirits, can be used to harden skin. It is used in hospitals as a cleanser and also to prevent bedsores developing. I always apply it twice daily to my feet for a week, before wearing new footwear, boots in particular and have done so for decades.

posted about 7 years ago

CC BY-SA 3.0

System‭

2019 reputation 180 537 246 0

Surgical spirit works every time. Rub it in using cotton wool for a month before you hit the trail. The best blister prevention is to walk, walk and walk.

posted over 10 years ago

CC BY-SA 3.0

Brian D‭

1 reputation 0 1 0 0

I've never succeed in "hardening" my feet against blisters, even when I was barefoot growing up.

However these things have worked for me

1. Vaseline or (preferably) diaper rash ointment before putting on socks
2. Injinji toe socks (If I double socks, these are always my base layer)

These worked on long hikes even when my feet got wet, and even in poorly fitting boots. Foot blisters from hiking are caused by friction. Toe socks, in my experience, negate 99% of the friction between and around your toes. Diaper rash ointment has two purposes. It repels moisture, and damp feet are the highest friction. It is also ridiculously slick, and doesn't wipe or wash off easily. The slick nature reduces friction, and the durability means it is very likely to last for the entire hike.

A lot of powders are sold and used, even baby powder, but in my experience those increase friction once they get damp.

Another common product is runner's lube (like Mueller Lube Stick). I've never noticed any improvement over diaper rash ointment and runners lube costs more.

Another common method is to wear more breathable shoes to reduce moisture. This does help, but I have found that with (1) and (2) above I can wear any shoes I want.

posted almost 13 years ago

CC BY-SA 3.0

Russell Steen‭

994 reputation 100 171 129 0

Soak feet in salt water. It dries out bottom of feet so blisters don't occur

posted over 9 years ago

CC BY-SA 3.0

Nikka please‭

1 reputation 0 1 0 0

I almost never get blisters. It's been a few years since I've had one, when I got a small blister between two toes. It was my own fault for not properly drying my feet after a creek crossing.

My hiking shoe is a Chaco Red Rock. They're about 16 ounces each, which is too heavy for a hiking shoe. My plan is to switch to a lighter shoe, and there appear to be some excellent trail-running shoes in the 7 to 9 ounce range. Keeping the weight light on your feet is even more important than keeping a light load on your back. Ray Jardine recommends shoes that are 11 ounces or less.

Next, always avoid natural fibers. No cotton, no wool. I wear polyester running socks cut below the ankle. Change your socks every hour or so when you stop for a break, and after you cross a creek. Polyester will not give you blisters as long as it's dry, because it will slide on your skin instead of grabbing and pulling your skin like natural fibers.

Do this and you won't need to harden your feet. Just do some normal prep hiking and you'll be ready to go.

If you're going to be hiking in snow over an inch or two deep you'll probably need to wear boots, in which case try some of the suggestions above.

posted over 11 years ago

CC BY-SA 3.0

Don Branson‭

116 reputation 16 33 16 0

This sounds odd but I have used it and it does work.Hemrroid ointment.It shrinks the mucous membranes and tightens the skin.If you already have a blister it will dry it up without breaking the skin.There is a warning about not using on open wounds so I usually give the blister a couple of days to start to heal if it is open.

posted almost 13 years ago

CC BY-SA 3.0

mikes‭

1 reputation 0 2 0 0

I've read about using rubbing alcohol to harden them up, but never done it. I usually wear silk or poly socks inside the self-wicking hydrophilic/hydrophibic layered socks. When I get a blister, I lance, drain, debride it, and then put a protective layer of superglue over it. It works.

posted over 11 years ago

CC BY-SA 3.0

OTC Dermabond‭

1 reputation 0 1 0 0