How to repair the broken stitching and seams in my leather boots?
After several years of abuse and poor care my boots have completely gone at the seams around the inner ankle (see photos)
What can I do to repair my boots? My current plan is to just get some thick thread and just resow them, but I am concerned about whether they will be at all waterproof afterwards. Is there anything else I should do/consider?
My boots are leather and made by Meindl if it makes any difference
P.S yes, I should definitely look after my boots better so they don't get in this state, but ts a bit late now...
This post was sourced from https://outdoors.stackexchange.com/q/6814. It is licensed under CC BY-SA 3.0.
3 answers
You are accessing this answer with a direct link, so it's being shown above all other answers regardless of its score. You can return to the normal view.
I have a similar problem with two great pairs of waterproof leather boots, with seams un-stitching alongside the ball of the foot.
GearAid Freesole is a tough flexible urethane repair highly recommended to re-bond the leather seams tightly instead of trying to sew them. A tube of this was 6.50 CAD at MEC.
This post was sourced from https://outdoors.stackexchange.com/a/7963. It is licensed under CC BY-SA 3.0.
0 comment threads
Your best bet for sewing is to use a Speedy Stitcher. The thick gauged thread works really well in boot/shoe repairs and is easy to use. You will be punching holes through the leather which creates potential for water to invade, but the waxy thread helps eliminate this issue.
I would finish up with a coat of Sno-Seal, which is a great way to help waterproof while also conditioning the leather.
Even with the holes you create sewing it up you will still have a good pair of boots that are perfect for your feet. A little water is easily manageable.
This post was sourced from https://outdoors.stackexchange.com/a/6817. It is licensed under CC BY-SA 3.0.
0 comment threads
I used some quick drying glue (a glue gun will work if you have one handy) to hold the seams together then after letting the glue dry overnight I picked up some rubber cement (the same stuff we used to patch bicycle tires as a kid) and spread the rubber cement along the both sides of the seam and between the two pieces of leather where the stitching came apart. Let the rubber cement dry for another 24 hours. The rubber cement is holding up very well and it's flexible as well so no cracking of the rubber cement. It's -20 degrees Celsius outside and snowing and my boots are still warm and comfortable and waterproof as well. For a $3.00 fix it's working out pretty good and the boots should last 1 or 2 more winters. If you are the person who care about what your boots look like this fix isn't for you. However, if you just want to repair a pair of expensive leather work boots this fix works excellent for boots that you want to use for another 2 years.
This post was sourced from https://outdoors.stackexchange.com/a/24490. It is licensed under CC BY-SA 4.0.
0 comment threads
0 comment threads