What would be a good knot to tie a clothesline to a tree?
I like the smell of sun-dried clothes/blankets/etc, and I got some line to make a clothesline. I've got a device that you pull the line through and it stays where you pulled it, which will be on the end of the line that's anchored to my great outdoors vehicle. I don't know the name of the device, but, anyway, the other end is to be tied to a tree branch. I'm wondering what would be a good knot to tie around the branch so that it can stay tight from the pull on the anchored end---with the device, but be able to be pulled loose on the branch end when I need to?
That is to say, I need the following:
(1) I can tighten the loop.
(2) I can pull the loose end of the rope to undo the whole thing.*
(3) I don't have to pick at the rope to undo it.
*While the loop is around the branch.
Have you considered a quick-release hitch? My first instinct was a highwayman's hitch, but that page suggests the tumble …
7y ago
Round turn and two half hitches: https://en.wikipedia.org/wiki/Roundturnandtwohalf-hitches That's exactly what this kn …
7y ago
The timber hitch works wel for tying the line to larger trees, the clove hitch is fine for any thin poles.
7y ago
I'm partial to the Anchor Hitch myself. It's simple, secure and you will be able to untie it when you're done.
7y ago
What your talking about here is essentially a slip knot. This will tension under load and not slip off. There are severa …
7y ago
A bowline knot or a clove hitch. (1) (2) (3) added to the question after this answer.
7y ago
This post was sourced from https://outdoors.stackexchange.com/q/16349. It is licensed under CC BY-SA 3.0.
6 answers
Have you considered a quick-release hitch? My first instinct was a highwayman's hitch, but that page suggests the tumble hitch as a superior alternative. Both knots have one end that can hold a load, and another end that can be used to instantly untie it.
A word of warning: don't use these knots for anything where a failing knot will cause more harm than some dirty clothes. As these are quick-release knots, they are more prone to unintentionally releasing quickly.
This post was sourced from https://outdoors.stackexchange.com/a/16373. It is licensed under CC BY-SA 3.0.
0 comment threads
Round turn and two half hitches:
https://en.wikipedia.org/wiki/Round_turn_and_two_half-hitches
That's exactly what this knot is for.
This post was sourced from https://outdoors.stackexchange.com/a/16371. It is licensed under CC BY-SA 3.0.
0 comment threads
A bowline knot or a clove hitch.
(1) (2) (3) added to the question after this answer.
This post was sourced from https://outdoors.stackexchange.com/a/16350. It is licensed under CC BY-SA 3.0.
0 comment threads
The timber hitch works wel for tying the line to larger trees, the clove hitch is fine for any thin poles.
This post was sourced from https://outdoors.stackexchange.com/a/16469. It is licensed under CC BY-SA 3.0.
0 comment threads
I'm partial to the Anchor Hitch myself.
It's simple, secure and you will be able to untie it when you're done.
This post was sourced from https://outdoors.stackexchange.com/a/16361. It is licensed under CC BY-SA 3.0.
0 comment threads
What your talking about here is essentially a slip knot. This will tension under load and not slip off. There are several options I'd say:
- A noose
- Running bowline
- Poachers knot
- A figure of eight with the rope passed though it
If you want to tension the line you can use something like a truckers hitch, I used this on my house washing line to get it good and tight.
Simply for simplicity I'd probably say a noose is the best bet. If you want something fancy then use the running bowline.
If the line is slipping laterally (on a horizontal branch), you may want to attach it using a prusik. This will resist slipping sideways as it will "grip" the branch.
This post was sourced from https://outdoors.stackexchange.com/a/16353. It is licensed under CC BY-SA 3.0.
0 comment threads
0 comment threads